MITSUBISHI ELECTRIC DX-TL1600EM - Manual (Page 26)

26
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Various settings (continued)
4. Turn the JOG dial until the present time display moves to
the desired position.
• The present time display moves to the right when turning
the JOG dial to the right. When the time display reaches the
right edge of the screen, it goes down to the next line.
• The time display moves to the left when turning the JOG
dial to the left. When the time display reaches the left edge
of the screen, it goes up to the next line.
Turn the JOG dial to
the right to move the
display to the right.
: :
1)
2)
After the screen has been
moved to its rightmost
border, it will move down
one level. 3)
By continuing to turn the
JOG dial, the screen will
scroll to its rightmost border.
- -
: :
- -
5. When the time display reaches the desired position, turn
the SHUTTLE ring to the right.
The display position can be changed when the
setting of “CH. TITLE” in the <MPX DISPLAY>
menu is as follows:
• When set to “NONE”, the display position can be
changed on single-screen, SPLIT 4, SPLIT 9 and
SPLIT 16 screen.
• When set to “CH.NO” the display position can be
changed on single screen only.
If “TITLE” is selected, the display position cannot
be changed.
■ Setting Multiplexer functions
Refer to page 41, “Multiplexer functions” for details.
■ Setting Timer program
Refer to page 50, “Setting the Timer” for details.
■ Setting recording functions
Refer to page 35, “Various recording settings” for details.
■ Data Clear Selection
This unit provides a menu to select the device and its data
to erase.
“WARNING – This function will erase all the data
on the selected device. In case of the hard disk drive,
all data on all internal and external HDD will be erased”
To edit this procedure press the SET UP key.
Example: Clearing the data recorded on main HDD.
1. Display the <MENU SETTING> menu and turn the JOG
dial until the cursor( ) is next to “DATA CLEAR SELECTION”.
A-REC/M-DET SETTING
@DATA CLEAR SELECTION
COMMUNICATION SETTING
2. Turn the SHUTTLE ring to the right to show the <DATA
CLEAR SELECTION> menu.
<DATA CLEAR SELECTION>
COPY DATA CLEAR OFF
ARCHIVE DATA CLEAR OFF
@HDD DATA CLEAR OFF
By turning JOG dial, to select the medium of the
data clear.
3. Turn the JOG dial until the cursor is next to “HDD DATA
CLEAR” and turn the SHUTTLE ring to the right.
• The “OFF” flashing and the message, “ALL DATA AND ALL
DRIVE DATA WILL BE ERASED.” appears on the screen.
<DATA CLEAR SELECTION>
COPY DATA CLEAR OFF
ARCHIVE DATA CLEAR OFF
@HDD DATA CLEAR OFF
ALL DATA AND ALL DRIVE
DATA WILL BE ERASED.
4. Turn the JOG dial until “ON” flashes.
• The message, “TURN THE SHUTTLE RING >> TO EXECUTE.”
appears on the screen.
“COPY DATA CLEAR” or “ARCHIVE DATA
CLEAR” appears on the screen when copy device
or archive device is connected.
5. Turn the SHUTTLE ring to the right to clear the data.
• If not needed, turn the JOG dial until “OFF” flashes and turn
the SHUTTLE ring to the right.
Please note that you cannot exit from the menu
when clearing the data and “ON” is flashing on the
screen.
6. Turn the SHUTTLE ring to the left or press the SET UP
button.
■ Rear Terminal Setting (MODE OUT setting)
A signal is output sending the status of this unit.
Example: Setting MODE OUT to “PLAY” (the default set-
ting is “REC”).
1. Display the <MENU SETTING> menu and turn the JOG
dial until the cursor is next to “REAR TERMINAL”.
DATA CLEAR SELECTION
COMMUNICATION SETTING
@REAR TERMINAL
SERVICE
2. Turn the SHUTTLE ring to the right to show the <REAR
TERMINAL> menu.
<REAR TERMINAL>
@MODE OUT REC
CAPACITY REMAIN HDD-10
%
3. Check the cursor is next to “MODE OUT”, then turn the
SHUTTLE ring to the right.
• The sub-item will start flashing.
<REAR TERMINAL>
@MODE OUT REC
CAPACITY REMAIN HDD-10 %
4. Turn the JOG dial until “PLAY” flashes and turn the SHUTTLE
ring to the right.
• The sub-item stops flashing.
<REAR TERMINAL>
@MODE OUT PLAY
CAPACITY REMAIN HDD-10 %
By turning the JOG dial, the item
of MODE OUT shown on the screen switches as
shown below:
REC PLAY POWER REMAIN