MGE UPS Systems EX-7 - Manual (Page 10)

EX 5/7/11RT Systems
c vi 86-86000-00 B00
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS.
This manual contains important instructions
that should be followed during installation and maintenance of the UPS and batteries.
The EX 5/7/11RT models that are covered in this manual are intended for installation in an environment within
0 to 40° C, free of conductive contaminant.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
Certification Standards
◗
IEEE 587-1980/ANSI C62.41 1980 Standards for Surge Withstand Ability
◗
FCC rules and regulations of Part 15, Subpart J, Class A
◗
UL listed under 1778, Standards for Uninterruptible Power Supply Equipment
◗
IEC 61000-4-2 (ESD): level 4.
◗
IEC 61000-4-3 (Radiated field): level 3.
◗
IEC 61000-4-4 (EFT): level 4.
◗
IEC 61000-4-5 (Fast transients): level 4.
◗
IEEE-C6241 Category B (ring wave).
◗
IEC 61000-4-6 (electromagnetic field).
◗
IEC 61000-4-8 (conducted magnetic field).
Important Safety Information and Standards