MGE UPS Systems EX-7 - Manual (Page 37)

Installation and User Manual
A wide range of optional cards will allow your UPS to talk to nearly all equipment management systems, making
integration faster and easier. All these cards can plug directly into the UPS, saving time and money on your next
UPS project. (Meta UPS Card and U-Talk/Basic Acquisition Cards are used exclusively with Multi-slot.)
Dual U-Talk/Basic Card (PN: 66060) CAN NOT BE USED WITH THIS UPS.
JBus Card (PN: 66061) Provides RS232 and RS485 connections for using the JBUS/ModBus
protocol. Both connections are female DB9. Only one connector can be used for
proper operation.
Dual port SHUT Card (PN: 66066) Has two independent female DB9 communication ports that use Serial
HID UPS Transfer (SHUT) protocol. Used with the UPS Control LCD display.
USB Card (PN: 66067) For direct communications (via USB) with the customer’s server and
automatic UPS recognition by the power management software of Windows 2000,
XP or 2003 Server, or Macintosh OS 9 and 10.
Dual port AS/400 Relay (PN: 66068) CAN NOT BE USED WITH THIS UPS.
Status Card
6 Alarm Relay Card (PN: 66069) Provides status in the form of 6 Alarm relays (250V 2A rated relays).
Connection provided are 12 terminal block wire clips.
XML-Web Card (PN: 66073) Features a web interface and keeps log files about UPS operation.
Network Management Card (PN: 66074) Features a web interface, Simple Network Management Protocol
(SNMP), Simple Mail Transfer Protocol (SMTP) email notification and keeps log files
about UPS operation.
Environmental Sensor (PN:66846) For Network Management Card: Monitors temperature, humidity, and
status of 2 dry contact inputs.
Installation 2 — 11 86-86000-00 B00