Maxtor 10K V - Manual (Page 120)

5-62 Maxtor Atlas 10K V
Table 5-84
Codes Used by the MRIE Field
Field Description
0h
No reporting of informational exception condition. This method instructs the disk drive not to report these
conditions.
1h
Asynchronous Event Reporting. This method of reporting instructs the disk drive to report informational
exception conditions by using the rules for asynchronous event reporting as described in the SCSI-3 Ar-
chitecture Model and the relevant Protocol Standard. The sense key will be set to RECOVERED ERROR
and the additional sense code will indicate the cause of the informational exception condition.
2h
Generate Unit Attention. This method of reporting instructs the disk drive to report informational excep-
tion conditions by returning a CHECK CONDITION status on any command.
The sense key is set to UNIT ATTENTION and the additional sense code will indicate the cause of the
information exception condition. The command that has the CHECK CONDITION will not be executed
before the informational exception condition is reported.
3h
Conditionally Generate Recovered Error. This method of reporting instructs the disk drive to report infor-
mational exception conditions dependent on the value of the PER bit of the Error
Recovery Parameters Mode Page, by returning a CHECK CONDITION status on any command. The
sense key will be set to RECOVERED ERROR and the additional sense code will indicate the cause of
the informational exception condition. The command that has the CHECK CONDITION will complete
before and informational exception condition is reported.
4h
Unconditionally Generate Recovered Error. This method of reporting instructs the disk drive to report in-
formational exception conditions regardless of the value of the PER bit of the Error Recovery Parameters
Mode Page, by returning a CHECK CONDITION status on any command. The sense key will be set to
RECOVERED ERROR and the additional sense code will indicate the cause of the informational excep-
tion condition. The command that has the CHECK CONDITION will complete without error before any
informational exception condition will be reported.
5h
Generate No Sense. This method of reporting instructs the disk drive to report informational exception
conditions by returning a CHECK CONDITION status on any command. The sense key will be set to NO
SENSE and the additional sense code will indicate the cause of the informational exception condition. The
command that has the CHECK CONDITION will complete without error before any informational excep-
tion condition is reported.
6h
Only Report Informational Exception Condition On Request. This method of reporting instructs the disk
drive to preserve the informational exception(s) data. To learn about these exception conditions, the ap-
plication client polls the disk drive via an unsolicited REQUEST SENSE command. The sense key is set
to NO SENSE and the additional sense code will indicate the cause of the informational exception condi-
tion.
7h – Bh Reserved.
Ch – Fh Vendor-specific.