Maxtor 10K V User Manual
Page 16
Maxtor Atlas 10K V
xix
Table 5-197
SET DEVICE IDENTIFIER Parameter List-Data Format....................... 5-132
Table 5-198
SET DEVICE IDENTIFIER Parameter List-Field Descriptions .............. 5-132
Table 5-199
START STOP UNIT Command Descriptor Block-Data Format ........... 5-133
Table 5-200
START STOP UNIT Command-Field Descriptions .............................. 5-133
Table 5-201
SYNCHRONIZE CACHE Command Descriptor Block-Data Format .. 5-134
Table 5-202
SYNCHRONIZE CACHE Command-Field Descriptions ..................... 5-134
Table 5-203
TEST UNIT READY Command Descriptor Block-Data Format ........... 5-135
Table 5-204
VERIFY Command Descriptor Block-Data Format ................................ 5-136
Table 5-205
VERIFY Command-Field Descriptions................................................... 5-136
Table 5-206
WRITE (6) Command Descriptor Block-Data Format............................ 5-137
Table 5-207
WRITE (6) Command-Field Descriptions............................................... 5-137
Table 5-208
WRITE (10) Command Descriptor Block-Data Format .......................... 5-138
Table 5-209
WRITE (10) Command-Field Descriptions............................................. 5-138
Table 5-210
WRITE AND VERIFY Command Descriptor Block-Data Format ........ 5-139
Table 5-211
WRITE AND VERIFY Command -Field Descriptions .......................... 5-139
Table 5-212
WRITE BUFFER Command Descriptor Block-Data Format ................. 5-140
Table 5-213
WRITE BUFFER Command -Field Descriptions................................... 5-141
Table 5-214
WRITE LONG Command Descriptor Block-Data Format..................... 5-142
Table 5-215
WRITE LONG Command-Field Descriptions ....................................... 5-142
Table A-1
SCSI-2/SCSI-3 Equivalent Terminology.................................................... A-1
Table A-2
SCSI-3 Quick Reference – Commands ...................................................... A-2
Table A-3
SCSI-3 Quick Reference – Messages.......................................................... A-3
Table A-4
SCSI-3 Quick Reference - Pages ............................................................... A-3
Table A-5
SCSI-3 Quick Reference – Sense Keys....................................................... A-5
Table A-6
SCSI-3 Quick Reference – Status Codes .................................................... A-5
Table B-1
Transfer Period Factor Field Values When PARL = 1 ................................ B-1
Table B-2
Transfer Period Factor Field Values When PARL = 0 ................................ B-2
Table B-3
Settings for the QAS, DT, and IU Fields of the Negotiated Rate
Information Page (INQUIRY Command) ................................................. B-2