Maxtor 10K V - Manual (Page 88)

5-30 Maxtor Atlas 10K V
5.11 LOG SENSE Command (4Dh)
Note: Log Sense data pages require special interpretation and also are
subject to change. For assistance with the Log Sense data pages,
contact your Maxtor Applications Engineer.
The drive collects operational information and stores these statistics as log data. Log
data are grouped by category into log pages. The LOG SENSE command allows an
initiator to retrieve the stored log data. The LOG SENSE command is a
complementary command to the LOG SELECT command.
Table Table 5-40 lists the log pages supported by the drive. Contact your Maxtor
Applications Engineer for more information.
Table 5-40
Disk Drive Log Pages
Page Code Description
00h Supported Log Pages
01h Buffer Overruns and Underruns
02h Write Error Counter
03h Read Error Counter
05h Verify Error Counter
06h Non-Medium Error Counter Page
07h Last n-Error Events Page
08h Format Status Page
0Dh Temperature Page
0Eh Start-Stop Cycle Counter
0Fh Application Client Page
10h Self Test Results Page
2Fh EWS Status