Is in table 5-175, Table 5-176), Table 5-178) – Maxtor 10K V User Manual
Page 191
Maxtor Atlas 10K V
5-133
Table 5-175
ILLEGAL REQUEST Sense Key Field Pointer Bytes\Field Descriptions
The data format of the Progress Indication bytes associated with the NOT READY
sense key is shown in Table 5-176; the description of the data is contained in
Table 5-177.
Table 5-176
NOT READY Sense Key - Progress Indication Bytes\Data Format
Table 5-177
NOT READY Sense Key - Progress Indication Bytes\Field Descriptions
The data format of the Retry Count bytes associated with the MEDIUM ERROR
or RECOVERED ERROR sense key is shown in Table 5-178; the description of
the data is contained in Table 5-179.
Table 5-178
MEDIUM ERROR or RECOVERED ERROR Sense Key - Retry Count-Data Format
Table 5-179
MEDIUM ERROR or RECOVERED ERROR Sense Key - Retry Count
16 - 17
Field Pointer
Field
Description
SKSV
Sense-Key Specific Valid
C/D
Command/Data. When the value in this field is 1, the Field Pointer identifies the first
byte in error in the Command Descriptor Block.
When 0, the Field Pointer identifies the first byte in error in the data parameters sent
by the initiator in the data-out buffer transfer.
BPV
Bit Pointer Valid. The drive does not support Bit-level resolution; the bit value must
be 0.
Bit Pointer
The drive does not support Bit-level resolution; the bit value must be 0.
Field Pointer
Indicates the first byte in error in either the Command Descriptor Block or in the data
parameters sent by the initiator.
Bit
Byte
7
6
5
4
3
2
1
0
15
SKSV =
1
Reserved
16 - 17
Progress Indication
Field
Description
SKSV
Sense-Key Specific Valid
Progress Indication
Indication of percent complete for the FORMAT UNIT command. The re-
turned value is the numerator of a fraction that has 65536 (10000h) as the de-
nominator (Progress Indication/10000h = percent complete).
Bit
Byte
7
6
5
4
3
2
1
0
15
SKSV =
1
Reserved
16 - 17
Retry Count