Intel NetStructure MPCBL0001 - Manual (Page 176)

176 Technical Product Specification
Order #273817
Intel NetStructure
®
MPCBL0001 High Performance Single Board Computer
Contents
Safety Warnings
20
Caution: Review the following precautions to avoid personal injury and prevent damage to this product or
products to which it is connected. To avoid potential hazards, use the product only as specified.
Read all safety information provided in the component product user manuals and understand the
precautions associated with safety symbols, written warnings, and cautions before accessing parts
or locations within the unit. Save this document for future reference.
AC AND/OR DC POWER SAFETY WARNING: The AC and/or DC Power cord is the unit’s
main AC and/or DC disconnecting device, and must be easily accessible at all times. Auxiliary AC
and/or DC On/Off switches and/or circuit breaker switches are for power control functions only
(NOT THE MAIN DISCONNECT).
IMPORTANT: See installation instructions before connecting to the supply.
For AC systems, use only a power cord with a grounded plug and always make connections to a
grounded main. Each power cord must be connected to a dedicated branch circuit.
For DC systems, this unit relies on the building's installation for short circuit (over-current)
protection. Ensure that a Listed and Certified fuse or circuit breaker no larger than 72VDC, 15A is
used on all current carrying conductors. For permanently connected equipment, a readily
accessible disconnect shall be incorporated in the building installation wiring. For permanent
connections, use copper wire of the gauge specified in the system's user manual.
The enclosure provides a separate Earth ground connection stud. Make the Earth ground
connection prior to applying power or peripheral connections and never disconnect the Earth
ground while power or peripheral connections exist.
To reduce the risk of electric shock from a telephone or Ethernet* system, connect the unit's main
power before making these connections. Disconnect these connections before removing main
power from the unit.
RACK MOUNT ENCLOSURE SAFETY: This unit may be intended for stationary rack
mounting. Mount in a rack designed to meet the physical strength requirements of NEBS GR-63-
CORE and NEBS GR 487. Disconnect all power sources and external connections prior to
installing or removing the unit from a rack.
System weight may be minimized prior to mounting by removing all hot-swappable equipment.
Mount your system in a way that ensures even loading of the rack. Uneven weight distribution can
result in a hazardous condition. Secure all mounting bolts when rack mounting the enclosure.
Warning: Verify power cord and outlet compatibility: Use the appropriate power cords for your
power outlet configurations. Visit the following web site for additional information: http://
kropla.com/electric2.htm.
Warning: Avoid electric overload, heat, shock, or fire hazard: Only connect the system to a to
a properly rated supply circuit as specified in the product user manual. Do not make connections to
terminals outside the range specified for that terminal. See the product user manual for correct
connections.