Intel NetStructure MPCBL0001 - Manual (Page 195)

Technical Product Specification 195
Order #273817
Intel NetStructure
®
MPCBL0001 High Performance Single Board Computer
Material Declaration Data Sheets
Material Declaration Data Sheet
Intel NetStructure® MPCBL0001 Single Board Compute
MPCBL0001N04Q
Pb Free Product: Yes Product Weight (grams): 2281.9
Manufacturer:
Intel Corporation
Restrictions on Hazardous Substances (RoHS) Compliance
RoHS Definition
* Quantity limit of 0.1% by mass (1000 PPM) of homogeneous material for: Lead (Pb), Mercury, Hexavalent Chromium,
Polybrominated Biphenyls (PBB), Polybrominated Diphenyl Ethers (PBDE)
* Quantity limit of 0.01% by mass (100 PPM) of homogeneous material for: Cadmium
* The part does not contain RoHS restricted substances per the definition above except lead, which is used under the following
exemption: Lead in electronic ceramic parts (e.g. piezoelectronic devices).
* The part does not contain RoHS restricted substances per the definition above except lead, which is used under the following
exemption: Lead in high melting temperature type solders (i.e. lead based solder alloys containing 85% by weight or more lead).
* The part does not contain RoHS restricted substances per the definition above except lead, which is used under the following
exemption: Lead as a coating material for a thermal conduction module c-ring.
* The part does not contain RoHS restricted substances per the definition above except lead, which is used under the following
exemption: Lead used in compliant pin connector systems.
* The part does not contain RoHS restricted substances per the definition above except lead, which is used under the following
exemption: Lead in solders to complete a viable electrical connection between semiconductor die and carrier within integrated circuit Flip
Chip packages.
* The part does not contain RoHS restricted substances per the definition above except lead, which is used under the following
exemption: Lead in solders for servers, storage and storage array systems, network infrastructure equipment for switching, signaling,
transmission as well as network management for telecommunications. The applicability of this exemption depends on use of the part in
one of the listed exempt applications.
* The part does not contain RoHS restricted substances per the definition above except lead, which is used under the following
exemption: Lead in glass of cathode ray tubes, electronic components and fluorescent tubes.
Where the part is declared to meet RoHS requirements, it has been verified to be in conformance with 2002/95/EC as we currently
understand the requirements. Intel has systems in place to verify conformance with all applicable environmental requirements and to the
best of our knowledge the information is true and correct.
RoHS Declaration
LEVEL A MATERIALS AND SUBSTANCES
Materials from Annex A of the EIA/EICTA/JGPSSI Material Composition Declaration Guide and listed in the table below are not
contained in this product in quantities above the threshold level for these materials as stated in the EIA/EICTA/JGPSSI Material
Composition Declaration Guide, nor intentionally added to this product.
Hexavalent Chromium Polybrominated Diphenylethers (PBDEs) Tributyl Tin (TBT) and Triphenyl Tin (TPT)
Hexavalent Chromium Compounds Polychlorinated Biphenyls (PCBs) Tributyl Tin Oxide (TBTO)
Cadmium / Cadmium Compounds Polybrominated Biphenyls (PBBs) Shortchain Chlorinated Paraffins
Asbestos Mercury / Mercury Compounds Polychlorinated Naphthalenes
Azo colorants Ozone Depleting Substances Radioactive Substances
LEVEL B MATERIALS AND SUBSTANCES
Beryllium/Beryllium Compounds Nickel/Nickel Compounds Vinyl Chloride Polymer (PVC)
Arsenic/Arsenic Compounds Brominated Flame Retardants Selenium/Selenium Compounds
Antimony/Antimony Compounds Bismuth/Bismuth Compounds Phthalates
Intel understands RoHS requires: Lead and other materials banned in RoHS Directive are either (1) below all applicable substance
thresholds as defined by the EU or (2) an approved exemption applies. (Note: RoHS implementation details are not fully defined and
may change.)
5/31/2006 Revision Date:
If this product contains lead (Pb) above the threshold limit of 1000 ppm, the concentration, location and use for this product are
listed below.
Lead/Lead Compounds
Description of Use Location in Product Material Concentration
(ppm)