Intel NetStructure MPCBL0001 - Manual (Page 190)

190 Technical Product Specification
Order #273817
Intel NetStructure
®
MPCBL0001 High Performance Single Board Computer
List of Supported Commands (IPMI v1.5 and PICMG 3.0)
Event Commands
Command NetFn* CMD IPMI 1.5 Spec Func
Set Event Receiver S/E 00h 23.1
Get Event Receiver S/E 01h 23.2
Platform Event (Event Message) S/E 02h 23.3
PEF and Alerting Commands
Command NetFn* CMD IPMI 1.5 Spec Func
Get PEF Capabilities S/E 10h 24.1
Arm PEF Postpone Timer S/E 11h 24.2
Set PEF Configuration Parameters S/E 12h 24.3
Get PEF Configuration Parameters S/E 13h 24.4
Set Last Processed Event ID S/E 14h 24.5
Get Last Processed Event ID S/E 15h 24.6
Alert Immediate S/E 16h 24.7
PET Acknowledge S/E 17h 24.8
Sensor Device Commands
Command NetFn* CMD IPMI 1.5 Spec Func
Get Device SDR Info S/E 20h 29.2
Get Device SDR S/E 21h 29.3
Reserve Device SDR Repository S/E 22h 29.4
Set Sensor Hysteresis S/E 24h 29.6
Get Sensor Hysteresis S/E 25h 29.7
Set Sensor Threshold S/E 26h 29.8
Get Sensor Threshold S/E 27h 29.9
Set Sensor Event Enable S/E 28h 29.10
Get Sensor Event Enable S/E 29h 29.11
Re-arm Sensor Events S/E 2Ah 29.12
Get Sensor Event Status S/E 2Bh 29.13
Get Sensor Reading S/E 2Dh 29.14
FRU Device Commands
Command NetFn* CMD IPMI 1.5 Spec Func
Get FRU Inventory Area Info Storage 10h 28.1
Read FRU Data Storage 11h 28.2
Write FRU Data Storage 12h 28.3
Table 108. IPMI 1.5 Supported Commands (Sheet 2 of 3)