Intermec 6710 - Manual (Page 112)

SECTION 4
"
Configuration
4-46 6710 Access Point User’s Guide
Setting Description
Scope Defines whether the action applies to all frames of
this type, or is restricted to selected subtypes:
Unlisted
(default)
Applies only to subtypes that are not
configured under [SubTypes 1] or
[SubTypes 2].
All Applies to all frames of this type.
[SubTypes 1] and [SubTypes 2] settings
for this frame type are ignored.
[SubTypes 1]
The predefined subtypes in the [SubTypes 1] menu provide
preconfigured filters that are useful in many networks. The
values for these subtypes cannot be changed. Subtypes are:
Action SubType Value
DIX-ARP <Pass> <DIX-EtherType> 08 06
SNAP-ARP <Pass> <SNAP-EtherType> 08 06
802.2-IPX-RIP <Pass> <802.2-IPX-Socket> 04 51
802.2-IPX-SAP <Pass> <802.2-IPX-Socket> 04 53
NNL <Pass> <DIX-EtherType> 87 5b
NETBIOS <Pass> <802.2-SAP> f0 f0
1 (User-defined subtypes.)
(through)
16
(User-defined subtypes.)
User-Defined Subtypes in [SubTypes 1] and
[SubTypes 2]
The value under user-defined subtypes allow individual
protocol ports, sockets, or SAPs to be specified for each of
the listed frame types. The filter takes action if either the
source or destination fields in the frame match the specified
port, socket, or SAP. A value of 00 00 denotes the subtype
as Unlisted.