Intermec 6710 - Manual (Page 151)

SECTION 4
"
Configuration
6710 Access Point User’s Guide 4-85
The filter configuration must be changed to allow
forwarding of other desired protocols, including TCP or
UDP. See Appendix E for discussion of OWL/IP restrictions
and permanent filters. Filters must be configured in all
super root candidates and OWL/IP designated bridges.
Default filter settings for OWL/IP are shown below.
Action Scope
DIX-IP-TCP Ports <Drop> <Unlisted>
DIX-IP-UDP Ports <Drop> <Unlisted>
DIX-IP-Other Protocols <Drop> <Unlisted>
DIX-IPX Sockets <Drop> <All>
DIX-Other EtherTypes <Drop> <Unlisted>
SNAP-IP-TCP Ports <Drop> <All>
SNAP-IP-UDP Ports <Drop> <All>
SNAP-IP-Other Protocols <Drop> <All>
SNAP-IPX Sockets <Drop> <All>
SNAP-Other EtherTypes <Drop> <All>
802.3-IPX Sockets <Drop> <All>
802.2-IPX Sockets <Drop> <All>
802.2-Other SAPs <Drop> <All>
Default filter settings for [SubTypes 1] are shown below.
Action SubType Value
DIX-ARP <Drop> <DIX-EtherType> 08 06
SNAP-ARP <Drop> <SNAP-EtherType> 08 06
802.2-IPX-RIP <Drop> <802.2-IPX-Socket> 04 51
802.2-IPX-SAP <Drop> <802.2-IPX-Socket> 04 53
NNL <Pass> <DIX-EtherType> 87 5b
NETBIOS <Drop> <802.2-SAP> f0 f0
1 <Drop> <DIX-IP-TCP-Port> 00 00
2 <Drop> <DIX-IP-TCP-Port> 00 00
3 <Drop> <DIX-IP-TCP-Port> 00 00
.
.
16
<Drop> <DIX-IP-TCP-Port> 00 00