Intermec 6710 - Manual (Page 170)

SECTION 5
"
Software Download
5-10 6710 Access Point User’s Guide
Server Start
Use Server Start to enable the access point as a TFTP
server. The format is:
File>
tftp server start
After you issue this command, the access point responds to
TFTP client requests directed to its IP address. When
acting as a server, the access point TFTP supports up to
four concurrent TFTP sessions.
Server Stop
Use Server Stop to stop the access point from being a TFTP
server when you are done transferring files. The format is:
File>
tftp server stop
After you issue this command, the access point no longer
responds to TFTP client requests. Current TFTP sessions
with the server are completed, however.
Server Log
Server Log saves a history of TFTP client requests. The
command’s format is:
File>
tftp server log
The TFTP server log contains useful TFTP server status
information starting from when you set up the server. You
must reboot the access point to clear the log.
TFTP Client Commands
The TFTP client in the access point supports standard Get
and Put commands.