Intermec 6710 - Manual (Page 81)

SECTION 4
"
Configuration
6710 Access Point User’s Guide 4-15
Use To
[Tcpip]
Page 4-16
Set options necessary for communications with
this access point. The options apply to all
TCP/IP ports. Telnet, SNMP, and HTTP
communications are supported.
[Bridge]
Page 4-23
Control the bridging of messages among the
radio and Ethernet ports for this access point.
Settings to control interaction with other access
points are also under the [Bridge] option.
[Security]
Page 4-86
Set the configuration program’s top-level
password and other security passwords.
The screens in this section show the options’ default
settings. Some settings (such as the serial number) are
unique to each access point. Other settings (such as certain
radio configurations) are automatically set and you cannot
change them. This section identifies the settings you
cannot change as “read-only.”
The following chart shows how to navigate the View
command’s menus and edit data.
Press To
[-] or [--] Scroll up through items in a list.
[¯], [+], [=], or [Tab] Scroll down through items in a list.
[®], [Enter], or [Spacebar] Display an option’s settings or
prompt after you highlight the
option. Also use these keys to
select the desired setting.
[¬], [Esc], or [Backspace] Exit a menu or prompt.
[Esc] Cancel editing.
[Enter] Complete editing.