Intermec 6710 - Manual (Page 172)

SECTION 5
"
Software Download
5-12 6710 Access Point User’s Guide
Put
Use Put on an access point client to copy a file to the server
(a PC or another access point).
The format is:
File>
tftp put <ip address> <foreign file name>
<local file name>
"
<ip address> is the IP address of the server, or “*”
which stands for the value of the ServerIpAddress
variable (described on page 5-18).
"
<foreign file name> is the name of the file as it will
appear on the server. The file name can contain
directory path information and must be in the format
required by the operating system running on the
server.
"
<local file name> is the name of the file to be sent
from the access point client.
EXAMPLE: This command takes boot file USTART29.BIN saved in the active
boot drive on the access point client, and stores it in the active boot
segment on the access point server with IP address 1.2.3.4:
File> tftp put 1.2.3.4 ustart29.bin ab:
Script Command
You can initiate an automatic software download through
SNMP by setting the appropriate server IP address and
script file name, and then setting the software download
time. The following two commands execute automatically
as if you had typed them on the command line:
File>
tftp get * <remote script file name>
ram:sysswd1
File>
script ram:sysswd1