Intermec 6710 - Manual (Page 314)

APPENDIX G
"
MIB
G-64 6710 Access Point User’s Guide
addrDestination OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
”The 802 address of the registered port.”
::= { addrEntry 1 }
addrAge OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
”The time (in minutes) since the entry was updated.”
::= { addrEntry 2 }
addrNodeId OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
”16-bit (0-65535) node/port ID”
::= { addrEntry 3 }
addrAlias OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
”An alias for the 802 address”
::= { addrEntry 4 }
addrDeviceId OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
”Device ID (0-65535).
An OWL node can, optionally,
set a device ID in a registration request PDU.”
::= { addrEntry 5 }
addrIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
”32-bit IP address for IP nodes (e.g. APs)”
::= { addrEntry 6 }
brgState OBJECT IDENTIFIER ::= { nBridge 6 }
-- The Bridge State Group