Intermec 6710 - Manual (Page 113)

SECTION 4
"
Configuration
6710 Access Point User’s Guide 4-47
Subtypes for [SubTypes 2] are:
Action SubType Value
1 <Pass> <DIX-IP-TCP-Port> 00 00
2 <Pass> <DIX-IP-TCP-Port> 00 00
3 <Pass> <DIX-IP-TCP-Port> 00 00
.
.
.
22 <Pass> <DIX-IP-TCP-Port>
00 00
Subtype Value
DIX--IP--TCP--Port Port value in hexadecimal.
DIX--IP--UDP--Port Port value in hexadecimal.
DIX--IP--Protocol Protocol number in hexadecimal.
DIX--IPX--Socket Socket value in hexadecimal.
DIX--EtherType Specify the registered DIX type in
hexadecimal.
SNAP--IP--TCP--Port Port value in hexadecimal.
SNAP--IP--UDP--Port Port value in hexadecimal.
SNAP--IP--Protocol
Port value in hexadecimal.
SNAP--IPX--Socket Socket value in hexadecimal.
SNAP--EtherType SAP in hexadecimal. To filter on both
SAP and OUI (Organizationally Unique
Identifier), use advanced filters.
802.3--IPX-Socket Socket value in hexadecimal.
802.2--IPX-Socket Socket value in hexadecimal.
802.2--SAP SAP in hexadecimal.
" NOTE: Port values may be entered in decimal, by adding a period to the
entry. For example, “23.” for port 23. The Value field displays the
hexadecimal equivalent.