JVC VR-N1600E - Manual (Page 104)

96
Applications
Specifying Generic Events
What is a generic event?:
This is a function that uses TCP or UDP protocol communication
as an input event for this unit.
When character strings in the communication data received by
the unit matches the predetermined conditions, the
corresponding generic event is triggered. To define a generic
event, you need to configure the incoming data settings at this
unit as well as the outgoing data settings at the camera (or
network device to be used).
The procedures for configuring the incoming data settings at this
unit are described below.
1
Click the [Generic Events...] button on the
[Camera Recording Administator] screen
2
Select Generic and click [Add new event...]
Camera Input/Output Port
and Events (continued)
Item Description
Add new
event... For adding new events.
Edit selected... For editing the event selected in the
[Defined events] list.
Remove
selected For deleting the event selected in the
[Defined events] list.
[Camera Recording Administator] Screen
[Generic
Events...] Button
A
B C
[Generic Events] Screen
B
C
A
[Add New Event] Screen
VR-N1600_J.book Page 96 Tuesday, June 3, 2008 2:26 PM