JVC VR-N1600E - Manual (Page 50)

42
Basic Operation
Playing, Skipping and Stopping Recorded
Images
Use the [Time Navigation] of the NVR Viewer to perform
playback, stop, and skip operations.
The buttons and sliders have the following functions.
ⅷ Browse Button
Note :
● The browse buttons are only enabled when a camera has
been selected.
● It may take several minutes for moving to complete after
you have pressed the browse buttons . Note that
if the buttons are clicked continuously before the images
are moved, the selected sequences will be moved
collectively.
ⅷ [Time] Slider
Dragging the slider to the left changes the recording date to an
older date, and dragging the slider to the right changes it to a
more recent date. Use the top slider bar for fine browsing (x0.4
to x240) within a limited period of time, and use the bottom bar
for easy browsing (x20 to x36,000) for longer time spans.
ⅷ [Playback] Slider
The center position is for playback at normal speed (x1). Drag
the slider to the left and right to reduce and increase the
playback speed respectively. Dragging the slider to the leftmost
position pauses playback.
The playback speed is displayed at the top right of the [Master
Time] area.
● Play Button
Note :
● The Play buttons do not work when the [Playback] slider is
at its leftmost position (paused). Select the desired speed
by moving the [Playback] Slider.
● The angle of the shuttle dial does not affect playback,
which is operated in the [Time Navigation] section using a
mouse.
Memo :
● When ASkip gaps during playbackB of [Time Navigation] is
checked, playback is performed by skipping portions for
which no recorded image is found in the selected camera.
● When the recorded images are played back with some
images skipped, the [SKIP] display will appear in red in
the [Master Time] area for some time.
● During playback, skip playback operations may differ
between a single screen and multiple screens. Even if the
selected camera does not contain any recording, skipping
will not take place as long as recording is found in another
camera. If recorded images are not found, the previously
displayed image appears.
Playing Back Recorded
Images via Mouse Control
(continued)
:
Moves to the previous image on the selected
camera (frame-by-frame reverse playback).
:
Moves to the next image on the selected camera
(frame-by-frame forward playback).
:
Moves to the first image in the previous sequence
of the selected camera. (This function may not
work properly when there is no sequence or for
some sequence lengths.)
:
Moves to the first image in the next sequence of
the selected camera. (This function may not work
properly if there is no sequence or for some
sequence lengths.)
:
Moves to the oldest recorded image of the selected
camera. (This function may not work properly at a
playback speed of 10x or higher.)
:
Moves to the latest recorded image of the selected
camera. (This function may not work properly at a
playback speed of 10x or higher.)
NVR Viewer
Browse Button
[Time] Slider
[Playback] Slider
Play Button
[Browse] Screen
: Plays back images in the reverse direction.
: Plays back images.
: Stops playback.
VR-N1600_J.book Page 42 Tuesday, June 3, 2008 2:26 PM