JVC VR-N1600E - Manual (Page 20)

12
Getting Started
Front Panel
A [OPERATE] Button/Indicator
Switches operation on or off. Press the button to turn operation
AONB and hold down the button to turn operation AOFFB. The
indicator blinks while the recorder is starting up or shutting
down.
B [REC CONTROL] Button/Indicator
Switches the recording control mode on or off. The indicator
lights up when the recording control mode is set to on.
Press and hold the [FUNCTION] button, and press the [REC
CONTROL] button at the same time to display the menu.
Memo :
● The main menu cannot be displayed in the recording control
mode or during recording.
● The recording control mode performs recording in
accordance with the settings in the [Camera Record Setting]
menu. (A Page 49)
C [SELECT] Button/Indicator
Use the S key to set to the camera selection mode. The
indicator lights up when the camera selection mode is set to on.
(A Page 32)
Press the [FUNCTION], [ALARM CLEAR], and [SELECT]
buttons at the same time to log off the system.
D [PTZ/PRESET] Button/Indicator
Switches between the PTZ mode and PRESET mode of the S
key. The mode changes each time the button is pressed. The
indicator lights up when PTZ mode is selected and blinks when
PRESET mode is selected.
E [SERIAL] Terminal
For connecting the communication control terminals on a mouse
(sold separately), flash memory (sold separately) or UPS (sold
separately).
Memo :
● Use the [SERIAL1 to 4] port on the rear panel for additional
hard disk drive connection. (A Page 10)
Note :
● Attach the serial port cover supplied with this product if this
port is not in use.
● This product may malfunction due to the presence of static
electricity. Remove any static before starting operation.
F [ZOOM OUT/CANCEL] Button
Selects ZOOM OUT (page A 33) when PTZ mode is selected
and selects a view in PRESET mode.
Cancels the selected values in the Main Menu window. Also,
pressing the [ZOOM OUT/CANCEL] button while holding down
the [FUNCTION] button changes the resolution of VGA output.
G [ZOOM IN/ENTER] Button
Selects ZOOM OUT (page A 33) when PTZ mode is selected
and selects a view in PRESET mode.
Sets the selected values in the Main Menu window. Also,
pressing the [ZOOM IN/ENTER] button while holding down the
[FUNCTION] button changes the resolution of VGA output.
You can control the click action of the mouse when the software
keyboard is displayed. (Page A 25)
H Status indicators
Ⅵ [WARNING] Indicator
Lights up when an error occurs. (A Page 147)
Press and hold the [ALARM CLEAR] button to turn off the light.
Ⅵ [ALARM] Indicator
Lights up when an alarm is activated.
Goes off when the [ALARM CLEAR] button is pressed.
Ⅵ [HDD] Indicator
Lights up when the built-in hard disk drive is accessed.
Ⅵ [LOCK] Indicator
Lights up when operation is locked. (A Page 18)
I
[FUNCTION] Button
Press the [FUNCTION] together with another button to use the
corresponding features.
[Special Key Operations] (A Page 130)
Press the [FUNCTION], [ALARM CLEAR], and [SELECT]
buttons at the same time to log off the system.
J [SEARCH] Button
Displays the date and time search screen when in the playback
mode. (A Page 36)
Part Names and Functions
(VR-N900U)
A
V
B
I H E D C K J L M O N
Q
P
R
S T U
F G
VR-N1600_J.book Page 12 Tuesday, June 3, 2008 2:26 PM