JVC VR-N1600E - Manual (Page 74)

66
Applications
Unit Setting (continued)
Main Menu List (continued)
Item Preset Values Description
Reference
Page
C Error Report Enables you to select how you want to be notified when an error
is detected in the system. ^
Dialog ⅷ Select check box
Do not select
check box
Select [Dialog] to display a warning dialog on the screen. A Page 147
Mail ⅷ Select check box
Do not select
check box
Select [Mail] to receive an e-mail notification on any abnormality
at the preset e-mail address.
Memo :
● For details on errors, refer to the actions to take when the
[WARNING] indicator lights up. (A Page 147)
^
D Record Control ^
ON at startup ⅷ Select check box
Do not select
check box
Select this check box to turn on the recording control mode
when the system starts up.
E Mail Server ^ Enables you to configure the necessary information on the mail
server to be used if you have selected
AMailB in the [Error
Report] item C.
^
SMTP Server Setting for the outgoing mail server.
Port Number ⅷ 25
User ID ^
Password ^
POP Server Setting for the incoming mail server.
Port Number ⅷ 110
User ID ^
Password ^
SMTP
Authentication ⅷ NONE
Authentication
POP before SMTP
Enables you to select the method of user authentication when
sending out a mail. For queries on the settings, consult your
system administrator.
Send Test Mail Click to send out a test mail to the address specified in the [Mail
Send List] item I.
F Emergency Record A Page 48
Time of Record NONE
30seconds
ⅷ 60seconds
5minutes
10minutes
20minutes
Continue
Select the duration of emergency recording, which starts
recording of all channels when a signal is input to the
[EMERGENCY] terminal on the rear panel.
Select
AContinueB to continue recording until it is stopped
manually on the front panel.
VR-N1600_J.book Page 66 Tuesday, June 3, 2008 2:26 PM