JVC VR-N1600E User Manual
Page 125
Advertising
117
3
Select the network to which NVR is connected
4
Right-click and select [Properties]
5
Check to ensure that both the [Cliant for
Microsoft Networks] and [Internet Protocol
TCP/IP
] check boxes are selected
6
Select [Internet Protocol
TCP/IP
] and click
the [Properties] button
7
Select [Use the following IP address]
8
Set [IP address] to 192.168.1.11
9
Set [Subnet Mask] to 255.255.255.0
10
Set [Default gateway] to 192.168.1.254
11
Click the [OK] button
12
Click the [OK] button on the [Local Area
Connections Proparties] screen
Note :
● Do not use the same IP address in the same network
environment.
● Do not register multiple IP addresses with one NIC when
specifying the computer network settings.
VR-N1600_J.book Page 117 Tuesday, June 3, 2008 2:26 PM
Advertising