JVC VR-N1600E - Manual (Page 29)

21
C Use the [7/B](5/B) button to display the list of
cameras
`
D Use the [10/0/E](8/E) button to select a camera `
E Use the [SKIP] button to select [Settings...], followed
by pressing the [16/ENTER] button
`
●The [Camera Settings] screen appears.
F Set the display rate for live images
●Set the display rate for live images to ASame as
recording B or ASame sa speedupB under [Live
Settings].
●When ASame sa speedupB is selected, the [Frame
Rate] specified under [Speedup Settings] is used as
the display rate for live images.
●When ASame as recordingB is selected, the [Frame
Rate] specified under [Recording Settings] is used as
the display rate for live images.
Memo :
● Use the [SKIP] to move between the setting items.
● Using the [2/D] or [10/0/E](8/E) button to select a
parameter. `
● To enter numeric characters, press the [SELECT] button
to turn on the [SELECT] indicator. After entering the
numeric characters, press the [PTZ/PRESET] button to
turn on the [PTZ/PRESET] indicator.
G Use the [SKIP] button to select [OK], followed by
pressing the [16/ENTER](ZOOM IN/ENTER) button
`
12
Repeat Step
10
for each camera
13
Use the [SKIP] button to select [Close],
followed by pressing the [16/ENTER](ZOOM IN/
ENTER) button
`
● Setting is complete and the [Live] screen appears.
● The [REC CONTROL] indicator lights up, and
recording starts in the recording control mode.
(A Page 48)
Memo :
● For details on the recording control mode, refer to
[Recording Camera Images] (A Page 48).
● You can specify decimal values using the software
keyboard.
C
D
Speedup Settings
Recording
Settings
Live Settings
[Live] Screen
VR-N1600_J.book Page 21 Tuesday, June 3, 2008 2:26 PM