Flash memory utility – JVC VR-N1600E User Manual

Page 115

Advertising
background image

107

You can save set values to flash memory devices or retrieve
data from them.

1

Select [Flash Memory Utility] from the main

menu

● The Flash Memory Utility screen appears.

Save Setting Date

The following are procedures to save the preset data in the flash
memory device.

1

Insert the flash memory device into the

[SERIAL] terminal on the front (rear) panel

2

Select [Save Setting Date]

● A [Save Setting Data?] confirmation message appears.

● The [Flash memory cannot be detected] message may

appear in some cases. In this case, wait for about 30
seconds and select [Save Setting Date] again.

3

Press the [OK] button

● The preset data is saved.

● When saving is complete, a message informing you

that data has been saved appears. Click the [OK]
button again.

4

Select [Remove Flash Memory]

● The [Remove Flash Memory ] confirmation message

appears. Press [OK].

● The [Flash Memory was removed] message appears.

Press [OK].

5

Remove the flash memory device from the

[SERIAL] on the front (rear) panel

Memo :

● Items specified in the [Image Quality...] settings of [Main

Menu]-[Camera Record Setting] (A Page 54), [OS
Setting](A Page 68), and [Password] section of [Unit
Setting] (A Page 65) will not be saved.

● Settings data is saved to the VR-N1600U/E folder in the

flash memory (USB memory). (VR-N1600U/E)

● Settings data is saved to the VR-N900U folder in the flash

memory (USB memory). (VR-N900U)

● To save the preset data after you have selected [Remove

Flash Memory], remove the flash memory device from the
serial terminal and insert it again. The flash memory

inserted will be automatically detected.

Flash Memory Utility

Flash Memory Utility Screen

VR-N1600_J.book Page 107 Tuesday, June 3, 2008 2:26 PM

Advertising