JVC VR-N1600E - Manual (Page 81)

73
Item Preset Values Description
A Server Configuration Enables you to specify the server name, port number, and details on external
access to the server.
Name ⅷ Server For specifying the server name.
Port ⅷ 80 For specifying the port number to use for the server.
Enable Outside IP
Address Select check box
ⅷ Do not select
check box
Select this check box to enable access to this unit from a surveillance computer
connected to the Internet via the router or firewall.
If you have selected this option, specify the global IP address in the [IP address]
column for the Internet router or firewall, and the port number in the [Port]
column for access to the Internet by the surveillance computer.
You have to configure an appropriate port forwarding on the router or firewall to
allow access by a surveillance computer that is connected to the Internet.
For details, refer to the “Instruction Manual” of the respective devices.
Outside IP
address ^ For specifying the global IP address when connecting to this unit via the Internet.
Outside Port ^ For specifying the port number to use when connecting to this unit via the
Internet.
Local IP Ranges... ^ Settings for using the Master/Slave feature by Milestone Systems.
For specifying the beginning of the IP address range in the left field on the
screen, and the end of the IP address range in the right field. Click the [Add]
button.
You may define as many local IP address ranges as required.
Memo :
● You may specify only one IP address. (Example: 192.168.10.1 to
192.168.10.1)
● For details, refer to the Milestone XProtect Smart Client User’s Manual
available on the website of Milestone Systems (http://
www.milestonesys.com).
● The URL address may be subject to changes.
Max,number of
clients ⅷ 11 For specifying the maximum number of NVR Viewer users allowed for
connection at any one time. The number of users also includes the use of the
[NVR Viewer] on the [Live] and [Browse] screens of this unit. Do not set a
number of larger than 11.
B User
Administration This section describes procedures to configure user accounts and rights.
User Setup... ^ Click this button to display the [User Administration] screen for setting the [User]
and [Password]. You can add new users in two ways: (APage 114 [User
Settings])
Memo :
● After adding a new user, a small square appears to the top left of the icon
on the [User Administration] screen. You can distinguish between [Add
Basic User...] and [Add Windows User...] using this mark when the same
user name is registered with both.
User VR-N1600U/E:vr-n1600
VR-N900U:vr-n900 Type:Basic user
Password: Nil
Administrator Type: Windows or Active Directory user or Active Director User
Password:vr-n1600(VR-N1600U/E), vr-n900(VR-N900U)
Add Basic
User... ^ You can create a dedicated user account for the surveillance system through
authentication of the user name and password.
VR-N1600_J.book Page 73 Tuesday, June 3, 2008 2:26 PM