JVC VR-N1600E - Manual (Page 47)

39
Select a view
For details on the view settings, refer to [Screen Setup] (A Page
56).
1
Select a view from the [Views] section, or from
the view list at the upper end of the window
Note :
● Do not switch the view frequently within a short time
interval.
● When live images do not appear on VN-C625U/VN-
C655U, set the password for connecting VN-C625U/VN-
C655U on the camera unit as well as this unit again. For
details on the setting procedures, refer to the
[INSTRUCRTIONS] of the camera in use and procedures
for setting the root password on the [Edit device settings]
screen in this manual (A Page 83).
● The audio setting is restored to ANo Audio SourcesB when
you return from the setting screen to [Live]. Select the
audio parameters again.
Searching Recorded Image Using [Time
Navigation]
You can search recorded images using [Browse] on the [Time
Navigation] screen as follows.
1
Double-click the [Time Navigation] bar on the
[Browse] screen
2
Select the search date/time from the box
● Specify the date in the left box and the time in the right
box.
3
Click the [Go To] button
● The view in the image display screen jumps to the
specified date and time.
● The specified date and time will appear in the Master Time
area.
Memo :
● The Master Time area displays the recording date and time
of the selected playback images. The master time is the time
to which all the cameras are linked, and when you specify a
time, all the recorded images you see in [Views] will be
accurately displayed.
● There are cases when there is no recorded image on motion
detection or on the specified date/time among the multiple
cameras within the view. In this case, the last image in the
camera’s database prior to the specified point in time is
displayed in the view. (Recorded images are saved to the
database. )
● The Master Time area also displays the currently selected
playback speed.
Note :
● The Master Time area may display a recording date/time
beyond that of the latest recorded image. In this case, click
the
button to move to the latest recorded image, and
click the button.
● When ASkip gaps during playbackB in the [Time
Navigation] section is ticked, playback may stop when it
exceeds the end of the recorded portion during
simultaneous recording and playback. In this case,
deselect the tick in [Skip gaps during playback]. If
playback stops, click the Play button again.
NVR Viewer Master Time Area
[Time Navigation] Section
[Go To] Button
[Browse] Screen
VR-N1600_J.book Page 39 Tuesday, June 3, 2008 2:26 PM