JVC VR-N1600E - Manual (Page 37)

29
● You can view live and recorded images using the NVR Viewer.
● NVR Viewer can also be used for remote surveillance of this unit from a PC. (A Page 121)
● Some of the NVR Viewer features may vary during remote surveillance from a PC.
Memo :
● NVR Viewer operates by logging into the distribution
server inside this unit.
● The built-in NVR Viewer logs into the distribution server of
of this unit (http://localhost or http://127.0.0.1). By default,
[Auto Login] to this unit is set to [On]. For details on the
login procedures, refer to [Connecting to a Computer] (A
Page 116).
● The NVR Viewer is unable to log in when the maximum
number of clients are connected to the surveillance
computer.
Note :
● When you have changed the settings in the [Camera
Record Setting] of the main menu, log out of the NVR
Viewer, and log in again. (A Page 121)
● When in the default state, you can click the [Connect]
button on the [Connect to Server] screen to log in. When
settings are changed, refer to the description after Step 2
of
eLogin to the NVR Viewerf (A Page 120).
● When the following symptoms appear, recovery may be
possible by restarting the NVR Viewer.
● Live video and playback images appear in black.
● NVR Viewer action is slow.
● NVR Viewer does not respond.
Note :
● You can restart the NVR Viewer using the following
procedure. In this case, the internal distribution server of
this unit will also be rebooted.
● Press and hold the [FUNCTION] button, and press the
[LIVE/BROWSE] button at the same time. (VR-
N1600U/E)
● Press the [FUNCTION], [ALARM CLEAR], and
[SELECT] buttons at the same time. (VR-N900U)
● The image and sound may not properly synchronize
during playback on the NVR Viewer.
● After you have completed the e-mail setting, perform a
test to verify that it can be sent successfully. (A Page
103)
● When an external hard disk is connected, it may take
several minutes to start up.
● Do not start the NVR Viewer during recording on VR-
N1600U/E at a frame rate that exceeds 160 ips. Doing so
may cause the recording frame rate to drop.
NVR Viewer
NVR Viewer[Live] Screen
View List
[Views] Section
[Live] Tab
[ ן] Button
OPERATE
REC CONTROL
LIVE/BROWSE
SELECT
PTZ/PRESET
SERIAL
㧝 㧞 㧟 㧠
㧡 㧢*1/' 㧣
㧥  
㧤

   
CANCEL ZOOM OUT ZOOM IN ENTER
WARNING
ALARM
HDD
LOCK
SEARCH FUNCTION ALARM CLEAR KEY REC/STOP STOP(PB) PLAY
SKIP
REV FWD
[SELECT] Button [ALARM CLEAR] Button [FUNCTION]
Button
[LIVE/BROWSE] Button
VR-N1600_J.book Page 29 Tuesday, June 3, 2008 2:26 PM