Viewing live images via mouse control, Displaying the [live] screen, Select a view – JVC VR-N1600E User Manual

Page 40: Select a camera

Advertising
background image

32

Basic Operation

This section describes the procedures for viewing live images by
controlling the mouse.

Displaying the [Live] Screen

1

Select [Live] from the main menu

● The NVR Viewer starts up and the [Live] screen

appears.

● When the [Browse] or [Screen Setup] screen of the

NVR Viewer is displayed, click the [Live] tab.

● To exit the NVR Viewer, click the [ן] button.

● If you have specified the camera record settings without

closing the [Live] screen, live images may not appear
immediately after you have exited the camera settings.
In this case,

AUnable to connect to the server!

Reconnecting to the server

B or AUnable to connect to

127.0.0.1:80 on the device name(camera name)!
Reconnecting to the server

B will appear on the [Live]

screen. (127.0.0.1:80 is the internal IP address of this
unit that is currently in operation. )

Memo :

● Depending on the condition of the network circuit, it may

take some time before images from the camera are
displayed.

● Depending on the connection of the additional hard disk,

several minutes may be required for the [Live] screen to

appear.

Select a view

For details on the view settings, refer to [Screen Setup] (A Page
56).

1

Select a view from the [Views] section, or from

the view list at the upper end of the window

Note :

● Do not switch the view frequently within a short time

interval.

● When live images do not appear on VN-C625U/VN-

C655U, set the password for connecting VN-C625U/VN-
C655U on the camera unit as well as this unit again. For
details on the setting procedures, refer to the
[INSTRUCRTIONS] of the camera in use and procedures
for setting the root password on the [Edit device settings]
screen in this manual (A Page 83).

● The audio setting is restored to ANo Audio SourcesB when

you return from the setting screen to [Live]. Select the

audio parameters again.

Select a Camera

1

Select a camera by clicking on the bar at the

upper end of the screen of the camera to select
using the mouse

● When you have selected a camera, the blue bar at the

top of each live image changes to a lighter blue tone.

Viewing Live Images via
Mouse Control

[Live] Screen

View List

[Views] Section

[Live] Tab

[

ן] Button

A

B

C

D

[Event] Section

[PTZ Control] Section

[Outputs...] Section

[Audio] Section

[Live] Screen

VR-N1600_J.book Page 32 Tuesday, June 3, 2008 2:26 PM

Advertising