Speco Technologies DVR-16TS - Manual (Page 109)

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
108
5.10.2 Text Overlay
This item is for you to choose which mode you want to display the text overlay
on the monitor. Select <Only Live> to display the text overlay in Live mode;
select <Only PB> to display the text overlay in Playback mode; and select
<Live/PB> to display in both modes.
NOTE:
Text overlay only shown in full screen mode.
NOTE: PB overlay is available only under x1 PB speed.
5.10.3 Exception Text Setup
This sub-menu is used to define the conditions that are to be treated as an
“Exception” and thus trigger an action (the function will be implemented later).
Exception Text Setup
Exception No.
Trigger
Exception String
By Numerals
Value
Value (Upper Limit)
1
ON
NO SALE
OFF
5.10.3.1 Exception No.
To select an exception for further settings; you can select from <1> to <16>.
5.10.3.2 Trigger
Select <ON>, those transactions which contain “Exception Strings” and which
meet the “Numerals” conditions will be marked as exceptions in the text
database and will trigger preset actions such as alarm output.
5.10.3.3 Exception String
The user can enter this item to define Exception String. The “Exception String”
is case-sensitive. Only exactly matched ones will be marked as exceptions.
5.10.3.4 By Numerals
“Exception String” must be defined before By Numerals” takes effect. If “By
Numerals” is enabled, only transactions which meet both “Exception String”
and “By Numerals” condition will be marked as exceptions and trigger and
action.