Speco Technologies DVR-16TS - Manual (Page 56)

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08 55
5.1.2 Language
The Language item allows the user to select the language for the OSD menu
and screen messages. Language selection takes effect immediately when the
selection is done. Press UP / DOWN to select from languages listed and
press ENTER to confirm.
5.1.3 Date / Time
The user can set the current date, time and other OSD parameters in this
menu. The Administrator’s privileges are required for entering the submenu.
In the System Setup menu, select <Date/Time> and press ENTER; the
Date/Time menu displays as follows.
Date/Time
1. Date
2. Time
3. Time Zone
4. Date/Time Display
5. Date Display Mode
6. Time Display Mode
7. Date/Time Order
8. Daylight Saving Time Setup
9. Network Time Protocol Setup 2005/02/21
10:39:26
OFF
1 Row
Y/M/D
24 HR
Date First
NOTE:
The reset date/ time setting applies only to future recorded
video, the date and time of previously recorded video will not be
changed.
NOTE:
After the Date/Time setting is changed, clearing the database is
recommended for avoiding record database corruption.
5.1.3.1 Date / Time Setting(s)
Select <Date> or <Time> and press ENTER to adjust the settings. LEFT /
RIGHT keys are used to move the cursor to previous or next field, ENTER is
for selecting, and UP / DOWN are used to change the value in the selected
field.