1 camera select, 2 dome protocol, 3 dome id – Speco Technologies DVR-16TS User Manual
Page 84: 4 camera title
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
83
5.3.1
Camera Select
This item is used to select a camera for setting parameters. The settings can
then be set for the related camera, such as dome protocol and camera title.
Move the cursor to <Camera Select> and press ENTER, then select a
channel using UP / DOWN keys.
5.3.2
Dome Protocol
Select the communications protocol associated with your dome camera using
the ENTER and Direction keys. The available protocol includes <DynaColor>,
<Pelco D>, <Pelco P>, <AD422>，<Fastrax 2> and <None> (default).
5.3.3
Dome ID
This item is used to assign an ID number to the selected dome camera. Note
that ID number must match the ID address set by the dome.
5.3.4
Camera Title
This item allows the user to change the title of each camera connected to the
unit. By default, the titles of cameras are numbered from 1 through 16
respectively. The title is displayed on screen after the title changes are set.
Follow these steps to enter a new title for a camera.
• In the Camera setup Menu, move the cursor to Camera Title and press
ENTER. A virtual keyboard with alphanumeric characters is displayed.
Camera Title
A B C D E
F G H
I
J
K
L M
N O P Q R S
T
U V W X Y
Z
a b c d
e
f
g
h
i
j
k
l
m
n o p q
r
s
t
u
v
w
x
y
z
0 1 2 3
4
5
6
7
8
9
.
!
@
# − _
◄
►
Backspace Delete
Cancel OK