Speco Technologies DVR-16TS - Manual (Page 110)

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08 109
You can select from below options:
<OFF>: The function is disabled.
<Specific>: That the value of transaction meets a specific value will be
marked as an exception. That specific value need to be
configured through the following sub-setting <Value>,
<Greater Equal Than>:
That the value of transaction is greater then or equal
to certain value will be marked as an exception. That
specific value need to be configured through the
following sub-setting <Value>,
<Less Equal Than>: That the value of transaction is less than or equal to
certain value will be marked as an exception. That
specific value need to be configured through the
following sub-setting <Value>.
<Inside The Range>:
That the price of transaction is within certain range will
be marked as an exception. The range need to be
configured through the following sub-settings <Value>
and <Value (Upper Limit)>.
<Outside the Range>: That the price of transaction is outside certain range,
will be marked as an exception. The range need to be
configured through the following sub-settings
<Value> and <Value (Upper Limit)>.
NOTE:
Only transactions (1) after “Exception Strings” and “By Numerals” are
set and (2) after “Trigger” is <ON> will be marked as exceptions in text
database. The data stored before won't be marked as exceptions.
5.10.4 Input Setup
This item is used to choose the connection method that is between your Text
Device and DVR, and setup some relative settings of the connection method.
Input Setup
1. Port Selection
2. Input Source
3. Camera Selection
4. Text Filter
5. Manual Filter Setup
6. Input
Process
7. Text Baud Rate
8. Text
Bits
9. Text Stop
10. Text Parity
Serial Port
Direct Connected
1
ASCII
Canonical
9600
8
1
None