Speco Technologies DVR-16TS - Manual (Page 61)

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
60
5.1.5.3 Load Factory Password
This item allows the administrator to reload the factory password incase the
administrator cannot remember the password. There are three options to
select from: <Admin> (reload the Admin password only), <User> (reload the
User password only), and <All> (reload the Admin and User passwords). The
factory password is 1234 for administrator and 4321 for user.
5.1.6 Network Setup
The Network Setup menu allows the administrator to configure the network by
specifying the network related settings, such as IP address and Netmask, etc.
See your network administrator and/or network service provider for more
specific information.
Some settings under the Network Setup menu, such as IP and PPPoE
Account, need to be configured through the virtual keyboard. The function key
usage pattern is slightly modified, please refer to section Key Usage in Virtual
Keyboard.
From the System Setup menu, select <Network Setup> and press ENTER.
The following menu displays.
Network Setup
1. LAN Select
2. LAN Setup
3. Dial-in Setup
4. Dial-out Setup
5. Trigger Port
6. Email Address
7. SMTP Setup
8. DDNS Setup LAN
100
Items in this menu are described in the following sections.