Speco Technologies DVR-16TS - Manual (Page 123)

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
122
Appendix D: Dial-up Connections via Modem
A dial-up modem connection allows the user to use the remote software and receive alarm
notice without a direct Internet connection. Following are the steps for establishing the
connection between a DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit and a PC.
Establishing Dial-in Connection
The Dial-in function enables the user to establish dial-up modem communication to and
from the DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit for the remote software use. Follow
the description to set up your DVR and PC.
DVR Configuration:
• Connect a USB modem to the USB socket and connect a working phone line to the
modem.
• Press MENU and input the Administrator password to access the OSD Main menu.
Select <Network Setup> and then <Dial-in Setup> to set up the Dial-In settings,
including Dial-in Account and password, etc.
• For more information on dial-in settings, see section 5.1.6.3 Dial-in Setup.
PC Configuration:
• Click <Start>, <My Network Places>, <View Network Connections> and then select
<Create New Connection>. The New Connection Wizard is displayed. Click <Next>
to continue.