Speco Technologies DVR-16TS - Manual (Page 49)

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
48
The default DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series RS-485 settings are
9600 Baud, 8 Data Bits, 1 Stop Bit and No Parity.
NOTE: The settings become effective after saving the changes and
exiting from the menu.
4.6.4 Dome Controlling Key
The function keys used in Dome Control are illustrated below.
Set / Go Preset
This key is used to enter the Dome Preset menu to enable the set up of a
specific position as a preset and to go to the predetermined preset positions.
Toggle Hint Screen
This function is used to avoid viewing the dome parameter information while
controlling the dome camera. Press this key to hide the screen. Press it again
to redisplay the screen.
Iris Open
Use this function to open the Iris on the dome camera.
Focus Near
Use this function to focus the dome camera near.
Zoom In
Use this function to zoom the dome camera in. This enables the user to move
closer to the viewing area.
ESC
Use this function to leave dome control mode and return to live and full screen
viewing mode.