Speco Technologies DVR-16TS User Manual
Page 91
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
90
Select <ezRecord Setup> from <Record Setup> and press ENTER, the
sub-menu appears as shown below:
ezRecord Setup
How Many Days To Record
Daytime Record
Night Record
Weekend Record
Average Normal PPS
Average Normal Quality
2 Days
Yes
Yes
Yes
3.75
Best
Follow these steps to Setup ezRecord:
• Select <How Many Days To Record> and press ENTER, then press
UP/DOWN to choose an option. The average normal PPS & Quality will be
adjusted automatically. The maximum of days depends of the size of your
HDD, in the other words, the larger the HDD installed, the more days the
unit can record.
• Move to <Daytime Record> and press ENTER. This item is for you to
select whether you want the DVR to record during daytime. If so, use
UP/DOWN to select <Yes> as an option; or, select <No> for not recording
during daytime.
• Repeat the same procedures through the 3rd and 4th item, respectively.
Note that <Weekend Record> will be not accessible if you select <NO> for
the item <Weekend Schedule> in <Schedule Setup>.
• Select <Average Normal PPS> and press ENTER, then press UP/DOWN
to choose an option. The <How Many Days To Record> will be computed
automatically.
• Select <Average Normal Quality> and press ENTER, then press
UP/DOWN to choose an option. The <How Many Days To Record> will be
computed automatically.
NOTE:
The current number of connected cameras will affect the
recording quality which wil be automatically calculated through the
<ezRecord Setup>. Therefore, once you disconnect cameras or
connect more cameras to the unit, you should reset the <ezRecord
Setup>.
Record Info