Speco Technologies DVR-16TS - Manual (Page 22)

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08 21
MODE
Press repeatedly to select desired main monitor display format. There are four
view modes available: full screen, 4-window (2×2), 9-window (3×3), and
16-window (4×4). Refer to section 4.1.1 Viewing Modes for more detailed
information.
PLAY/ STOP
Press this key to switch between live image and playback video.
NOTE: Video taken within the latest 5 ~ 10 minutes cannot be played
back because the video is still saved in the buffer.
SEQ (Sequence)
Press to start automatic sequencing of the video coming in from the installed
cameras.
FREEZE
• Press FREEZE while viewing live image, the live video will be frozen, but
the date/ time information shown on the monitor will continue updating.
Press FREEZE again to return to live mode.
• Press FREEZE while playing recorded video, the playback video will be
paused. Press LEFT/ RIGHT to move the recorded video reverse/ forward
by a single step. Press FREEZE again to continue playing video.
MENU
Press this key to call up the OSD setup menu.
SEARCH
In both Playback and Live mode, the user can press SEARCH to call up the
Search menu for searching and playing back recorded video by date and time
or events.
ZOOM/ ENTER
• In OSD menu or selection interface, press this key to make the selection or
save settings.
• In live full screen view mode, press this key to view a 2× zoom image;
press it again to return.