Speco Technologies DVR-16TS User Manual
Page 18
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
17
Refer to
Appendix F: Alarm I/O Pin Definition
for detailed pin information on
the Alarm I/O for the DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT.
IEEE1394 (for DVR-4TN/ 8TN/ 16TN only)
DVR-4TN/ 8TN/ 16TN
series unit is equipped with two IEEE1394 (FireWire®)
ports for extended connections.
LAN 1000M (for DVR-16TS/ 16-TT only)
This port is for DVR-16TS/ 16-TT to connect to a NAS device.
Audio In/ Out
The DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit provides two channels of
audio recording and playback. The Audio In RCA connector is offered for
connecting an audio source device (e.g. external amplified microphone) to the
unit. The Audio Out RCA connector is available for connecting an audio output
device (e.g. amplified speakers) to the unit.
USB 2.0 (x4)
There are two USB2.0 ports in the rear panel and two in the front panel to
allow users to connect external USB devices to the unit, such as a
ThumbDrive
®
.
The DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit allows the user to preset
the OSD settings using a USB mouse.
LAN (RJ-45)
The DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit is capable of networking.
The LAN port allows the DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit to
access the network/ Internet through an Ethernet connection.
Power Supply
The DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit includes an AC power
connection jack. Please use the power supply cord that ships with the unit.
NOTE:
Use of other power supply may cause overloading.
Power Switch
The power switch is used to power up or shut down the unit.