Schneider Electric Modbus Plus Network Bridge Multiplexer none - Manual (Page 75)

Configuring the Programmable Models 31007492 65
4.6 Setting the Configuration Switches
Before applying power to the BM85, set its rear panel switches to allow
either downloading or running your application. Figure 15 shows the
switch locations and setup.
BM85
USE
UPPER
SWITCHES
SWITCH POSITION
1 2 3 4 5 6 7 8
U = UP
D = DOWN
X = DON’T CARE
BM85 OPERATION
RUN APPLICATION STORED IN BM85.
SWITCHES 1-7 DEFINED BY USER. U USER DEFINED
X X X X X U D D ALLOW DOWNLOAD OF APPLICATION.
X X X X X D D D RUN CONTINUOUS INTERNAL TESTS
SEE INDICATOR CODES IN THIS CHAPTER.
1 2 3 4 5 6 7 8
Figure 15 BM85 Programmable Models: Configuration Switches