Schneider Electric Modbus Plus Network Bridge Multiplexer none - Manual (Page 90)

Installing the BM85 31007492 80
5.5 Attaching Identification Labels
Labels areāāsupplied withāāāthe BM85 for recording theāāunit's setup
parameters. Use these labels to provide ready information for persons
who will maintain the BM85 in the future.
Before completing the BM85 installation, enter the required information
on the labels and attach them to the BM85. Place the labels on the unit
in positions where they can be easily seen.
5.5.1 Modbus Plus Port Label
On this label enter the Modbus Plus network number and node address
you have assigned to the BM85. Place the label on the BM85 so that it
can readily identify the unit in your application.
Figure 23 shows the layout of the label.
Modbus Plus
Network
Node
Figure 23 Modbus Plus Port Label