Schneider Electric Modbus Plus Network Bridge Multiplexer none - Manual (Page 95)

Compatible Devices and Cables 31007492 85
A.1.3 Devices and Cables for Configuring Modbus Ports
Following is a listing of compatible devices and cables that can be used
for configuring the ports on the BM85 Modbus models. Use of an IBM
AT or XT computer requires a VT100 terminal emulation program, such
as PROCOMM PLUS or equivalent. For further information contact:
Datastorm Technologies, Inc., 1621 Towne Drive, Columbia, MD 65202.
Telephone: (314) 474-8461.
Device Cable and Adapter Combination
DEC VT100 (direct) BM85 – W953 – 25F25F – VT100
DEC VT100 (modem) BM85 – 25F9M – W978 – modem – modem – W978 – 25F25F
– VT100
IBM AT (direct) BM85 – W952 – IBM AT
IBM AT (modem) BM85 – 25F9M – W978 – modem – modem – W978 – 25F9F
– IBM AT
IBM XT (direct) BM85 – W953 – 25F25F – IBM XT
IBM XT (modem) BM85 – 25F9M – W978 – modem – modem – W978 – 25F25F
– IBM XT
A.1.4 Cables for Modbus Master Devices
Device Cable and Adapter Combination
P230 (direct) BM85 – W953 – P230
P230 (modem) BM85 – 25F9M – W978 – J478 – J478 – P230
P965 BM85 – 25F9M – P965
IBM AT BM85 – W952 – IBM AT
IBM XT BM85 – W953 – 25F25F – IBM XT
Modvue BM85 – W952 – J347 – Modvue
DEC VAX BM85 – 25F9M with following signals crossed: TX/RX, RTS/
CTS, DTR/DSR – VAX
A.1.5 Cables for Modbus Slave Devices
Device Cable and Adapter Combination
984–380/480/680/780 BM85 – 9M9M – W952 – 984
984A/B/X BM85 – W953 – 984
584 BM85 – 25F9M – W190 – 584
884 BM85 – X25F9M – W807 – 884
Micro 84 BM85 – X25F9M – W807 – J375 – Micro 84
484 BM85 – 25F9M – W978 – J478 – J474 – 484
184/384 BM85 – W953 – J347 – 184/384
J478 modem BM85 – 25F9M – W978 – J478 – J478 – Controller