Sanyo DSR-5716P - Manual (Page 100)

RECORD SET 2
English
99
7
Turn the jog dial to select the “PICTURE
QUALITY” setting and then turn the
shuttle dial clockwise.
The cursor moves to “AUDIO RECORDING”.
[Settings] (‹ indicates default setting)
„ Setting the picture quality for each camera
(1) Select “INDIV.” and turn the shuttle dial clockwise.
The cursor moves to “PICTURE QUALITY”.
(2) Turn the shuttle dial clockwise.
The <PICTURE QUALITY SET> screen is displayed.
On the DSR-5709P, cameras No. 01-09 are displayed.
(3) Turn the jog dial to select the camera number and then
turn the shuttle dial clockwise.
“EN” flashes.
(4) Turn the jog dial to select the picture quality and then turn
the shuttle dial clockwise.
The cursor moves to the next camera number.
(5) Set the picture quality for the other cameras in the same
way.
(6) Turn the shuttle dial counter-clockwise.
The display returns to the <ALARM REC MODE SET>
screen.
8
Turn the jog dial to select “AUDIO
RECORDING” and turn the shuttle dial
clockwise.
“OFF” flashes.
9
Turn the jog dial to select “ON” or
“OFF” and then turn the shuttle dial
clockwise.
The cursor moves to “ALARM INTERLEAVE”.
[Settings] (‹ indicates default setting)
z The settings for audio recording are restricted by the
settings for “ALARM INTERLEAVE (Step 11)” as follows:
ONLY/SW/ALL:
Audio recording is enabled when “REC RATE (Step 13)” is
set to 1 FPS or more.
ALL (P-1 – 4):
Audio recording is enabled when “REC RATE” for any one
of the program-registered cameras is set to 1 FPS or more.
ONLY (P-1 – 4):
Audio recording is disabled.
z You see “A” (Audio recoding mark) displayed next to “REC
RATE” whenever audio recording is enabled.
Setting Description
BASIC (BA) Basic
NORMAL (NO) Normal
‹ ENHANCED (EN) Enhanced
FINE (FI) Fine
SUPER FINE (SF) Super Fine
INDIV. Picture quality is set for each camera.
<ALARM REC MODE SET>
ALARM RECORDING : ENABLED
PICTURE QUALITY : ENHANCED
PICTURE QUALITY SET ->
AUDIO RECORDING : OFF
ALARM INTERLEAVE : ONLY
REC RATE: 12.5FPS, DURATION: 20SEC
PRE-ALARM RECORDING : OFF
REC RATE: ***** FPS, DURATION: *****
ALARM TRIGGER : ALARM
MOTION SENSOR ->
<PICTURE QUALITY SET>
CHANNEL 01 02 03 04 05 06 07 08
NORMAL REC EN EN EN EN EN EN EN EN
ALARM REC EN EN EN EN EN EN EN EN
CHANNEL 09 10 11 12 13 14 15 16
NORMAL REC EN EN EN EN EN EN EN EN
ALARM REC EN EN EN EN EN EN EN EN
Setting Description
‹ OFF Audio is not recorded.
ON Audio is recorded.
<ALARM REC MODE SET>
ALARM RECORDING : ENABLED
PICTURE QUALITY : ENHANCED
PICTURE QUALITY SET ->
AUDIO RECORDING : OFF
ALARM INTERLEAVE : ONLY
REC RATE: 12.5FPS, DURATION: 20SEC
PRE-ALARM RECORDING : OFF
REC RATE: ***** FPS, DURATION: *****
ALARM TRIGGER : ALARM
MOTION SENSOR ->
<ALARM REC MODE SET>
ALARM RECORDING : ENABLED
PICTURE QUALITY : ENHANCED
PICTURE QUALITY SET ->
AUDIO RECORDING : ON
ALARM INTERLEAVE : ONLY
REC RATE:A12.5FPS, DURATION: 20SEC
PRE-ALARM RECORDING : OFF
REC RATE: ***** FPS, DURATION: *****
ALARM TRIGGER : ALARM
MOTION SENSOR ->