Sanyo DSR-5716P - Manual (Page 190)

RECORD SET 3
English
189
Use the following procedures to set conditions for normal
recording and timer recording.
Use the following procedure to set the picture quality for
normal recording.
1
Click the button on the operation
panel.
The “MAIN MENU” is displayed.
2
Click “2. RECORD SET”.
The “RECORD SET” screen is displayed.
3
Click “3. NORMAL REC MODE SET”.
The “NORMAL REC MODE SET” screen is displayed.
4
Set “PICTURE QUALITY”.
[Settings] (‹ indicates default setting)
„ Setting the picture quality for each camera
(1) Set “PICTURE QUALITY” to “INDIV.”.
The “NORMAL REC MODE SET” screen is displayed.
(2) Set the picture quality for each camera.
On the DSR-5709P, cameras No. 01-09 are displayed.
(3) Set “AUDIO RECORDING”, “REC RATE” and “REC
PROGRAM GROUP” (Jsteps 5 to 7).
(4) Click [SAVE].
Audio can be recorded together with images during normal
recording.
Note, however, that since this audio data is also stored in the
recording area, the recording time for this area decreases.
5
Set “AUDIO RECORDING” to “ON” or
“OFF”.
[Settings] (‹ indicates default setting)
Use the following procedure to set the recording rate for
normal recording.
6
Set “REC RATE” to the desired
recording rate.
[Settings] (‹ indicates default setting)
The letter “A” is displayed in front of recording rates that can
be set for audio recording.
z When only one camera is connected, recording is
performed at 25 FPS even if 50 or 100 FPS are set.
z When two or more cameras are connected and 50 or 100
FPS is set, the actual recording rate is roughly the
recording rate divided by the number of cameras.
(Example: When 8 cameras are connected and the
recording rate setting is 100 FPS, the actual recording rate
is 12.5 FPS)
z When mirroring or pre-alarm recording is set to “ON”,
recording rates that can be set are limited.
3. NORMAL REC MODE SET
Setting the picture quality for recording
Setting Description
BASIC Basic
NORMAL Normal
‹ ENHANCED Enhanced
FINE Fine
SUPER FINE Super Fine
INDIV. Picture quality is set for each camera.
NORMAL REC MODE SET
PICTURE QUALITY :
REC PROGRAM GROUP :
AUDIO RECORDING :
REC RATE :
SAVE
OFF
OFF
( 166H )
ENHANCED
A 12.5 FPS
4
5
6
7
8
NORMAL REC MODE SET
SAVE
PICTURE QUALITY : INDIV.
AUDIO RECORDING : OFF
REC PROGRAM GROUP : OFF
REC RATE : ( 166H ) A 12.5 FPS
EN
01
EN
02
EN
03
EN
04
EN
05
EN
06
EN
07
EN
08
EN
09
EN
10
EN
11
EN
12
EN
13
EN
14
EN
15
EN
16
(1)
(2)
(3)
(4)
Setting audio recording
Setting Description
‹ OFF Audio is not recorded.
ON Audio is recorded.
Setting the recording rate
Setting Description
A100, A50, A25, A16.67,
‹
A12.5, A8.333, A6.25,
A5, A4.167, A3.571,
A3.125, A2.778, A2.5,
A2.273, A1.923, A1.667,
A1.471, A1.316, A1.19,
A1.087, A1 Recording is performed at the
selected recording rate (unit: FPS).
(Audio can be recorded.)
0.5, 0.333, 0.25, 0.2, 0.1,
0.05, 0.033
Recording is performed at the
selected recording rate (unit: FPS).
(Audio cannot be recorded.)
*** Recording rate is not set.