Sanyo DSR-5716P - Manual (Page 104)

RECORD SET 2
English
103
7
Turn the jog dial to select the “REC
RATE” setting and then turn the shuttle
dial clockwise.
[Settings] (‹ indicates default setting)
Refer to “Table of pre-alarm recording times” (JP.224) when
setting.
z When mirroring is set to “ON”, configurable recording rates
are limited.
z When only one camera is connected, recording is
performed at 25 FPS even if 50 or 100 FPS are set.
z When four cameras are connected and 100 FPS is set,
recording is performed at the recording rate close to the set
rate (100 FPS) divided by the number of cameras.
(Example: When 8 cameras are connected and the
recording rate setting is 100 FPS, the actual recording rate
is 12.5 FPS)
8
Turn the jog dial to select the
“DURATION” setting and then turn the
shuttle dial clockwise.
The cursor moves to “ALARM TRIGGER”.
[Settings] (‹ indicates default setting)
9
Press the [EXIT/OSD] button.
The setting is completed and the display returns to the normal
screen.
“PRE” appears in the operation display. When an alarm
occurs, “ALARM” is displayed.
z When “PRE-ALARM RECORDING” is set to “ON”, press
the [REC/STOP] button to record past video.
The alarm number next to “PRE” is not updated.
z Pre-alarm recording is performed during the period set by
“DURATION” before an alarm occurs. To play back pre-
alarm recordings, perform alarm search (using the
[SEARCH] button). (JP.39)
Recordings are played back at the point the alarm occurs.
Use the shuttle dial to begin reverse playback.
Setting Description
100, 50, 25, 16.67,
‹
12.5, 8.333, 6.25, 5,
4.167, 3.571, 3.125,
2.778, 2.5, 2.273, 1.923,
1.667, 1.471, 1.316, 1.19,
1.087, 1 Recording is performed at the
selected recording rate (unit: FPS).
Setting Description
‹ 5SEC, 10SEC, 20SEC,
40SEC, 1MIN, 2MIN, 3MIN,
4MIN, 5MIN, 10MIN, 15MIN Records for the set duration.
<ALARM REC MODE SET>
ALARM RECORDING : ENABLED
PICTURE QUALITY : ENHANCED
PICTURE QUALITY SET ->
AUDIO RECORDING : OFF
ALARM INTERLEAVE : ONLY
REC RATE: 12.5FPS, DURATION: 20SEC
PRE-ALARM RECORDING : ON
REC RATE: 12.5FPS, DURATION: 5SEC
ALARM TRIGGER : ALARM
MOTION SENSOR ->
<ALARM REC MODE SET>
ALARM RECORDING : ENABLED
PICTURE QUALITY : ENHANCED
PICTURE QUALITY SET ->
AUDIO RECORDING : OFF
ALARM INTERLEAVE : ONLY
REC RATE: 12.5FPS, DURATION: 20SEC
PRE-ALARM RECORDING : ON
REC RATE: 12.5FPS, DURATION: 5SEC
ALARM TRIGGER : ALARM
MOTION SENSOR ->
01-01-07 00:00:00 REC REPEAT EN A PRE 0000000
02
Number of alarms
“PRE” display
EXIT/OSD