Sanyo DSR-5716P - Manual (Page 17)

16
English
INSTALLATION AND CONNECTIONS 3
INTRODUCTION
SE
TTINGS
N
E
T
WO
R
K
CO
NT
RO
L
NETW
ORK
O
P
E
RATION
NE
T
W
ORK
S
E
TTINGS
OTHE
R
OPE
RATION
Connect to a PC for control of the digital video recorder over a
network with a switch or connect to the Internet.
To enable control of the digital video recorder over a network,
connect to the switch via Ethernet cable or make a similar
connection.
For the Ethernet cable, you may use either of straight or cross
type.
Connect to the Internet via a router or similar device.
When connecting to a router, you may use either of straight or
cross type Ethernet cable.
To connect to an ADSL modem and other devices, be sure to
read the instruction manuals for each connected device.
Connect a microphone and speakers via an amplifier in order
to input or output audio.
When using external alarms (i.e., intruder sensors), connect
external switches to the ALARM IN terminals.
Only terminals 1 to 9 are available on the DSR-5709P.
Connecting a LAN terminal
LAN connection
Internet connection
Switch
Ethernet cable
PC
Internet
Router, ADSL
modem, etc.
Ethernet cable
Connecting an amplifier
Connecting alarm input terminals
IN OUT
AUDIO
Audio input
terminal Audio output
terminal
Amplifier
(sold separately)
1
16
Connect external
switches to ALARM IN
terminals.