Sanyo DSR-5716P - Manual (Page 167)

166
English
OPERATION PANEL FUNCTIONS AND RESTRICTIONS 3
INTRODUCTION
S
ETTINGS
NE
T
W
O
R
K
CO
NT
RO
L
NETW
ORK
O
P
E
RATION
NE
T
W
ORK
S
E
TTINGS
OTHE
R
OPE
RATION
Operation is available when a camera with remote operation
capability is connected to the VIDEO terminal, RS-485
terminal, or 2ND RS485/422 terminal and settings are carried
out using camera control settings (JP.209).
z Use the network control settings (JP.200) to set user
levels for camera operation.
z Camera controls are carried out in full screen display.
z Multiple users can simultaneously monitor and control the
same camera.
1
Click [CAMERA CONTROL].
In place of the operation panel on the left side of the screen,
camera operation panel is displayed.
z When “AUDIO” is set to “ON” or when saving real-time to
PC, the [CAMERA CONTROL] button is not displayed.
2
Click each button to use a dome
camera.
1. Channel number
Displays the channel number selected using “Channel
selection”.
The DSR-5709P displays only nine channels.
2. Channel selection
Select a camera channel.
The DSR-5709P displays only nine channels.
3. Pan/tilt
Adjust camera direction. Follow the chart below and
press directional buttons to adjust camera in eight
different directions.
When displaying camera internal menu, use for selecting
menu items.
Camera operation panel
LIVE NORMAL RECORDING MODE RECORDING
STOP ALARM RECORDING MODE
01-01-07 00: 36: 17 LV1:0 LV2:0 LV3:0 LV4:1
01
QUALITY : 3 READ INTERVAL : SIZE :
AUDIO :
1 1
OFF SET SAVE TO PC : ---- OFF
CAMERA CONTROL
USER ID ID4
1
2
3
4
5
7
10
12
13
15
16
17
18
6
8
9
11
14
19
20
1
Upper left Up Upper right
Right
Lower right Down Lower left
Left