Sanyo DSR-5716P - Manual (Page 57)

56
English
SAVING (COPYING) RECORDED VIDEO 6
INTRODUCTION
SE
TTINGS
N
E
T
WO
R
K
CO
NT
RO
L
NETW
ORK
O
P
E
RATION
NE
T
W
ORK
S
E
TTINGS
OTHE
R
OPE
RATION
9
Turn the shuttle dial clockwise.
“1” flashes.
10
Turn the jog dial to select “20” and then
turn the shuttle dial clockwise.
The cursor moves to “COPY START”.
11
Specify the channel to copy
You can copy multiple channel videos at the same time.
Use the [CAMERA SELECT] button on the front panel to
specify a channel(s) whose video you want to copy.The
specified channel(s) turns white from grey.
z The channel(s) which was playing the video when the
[MARK/COPY] button was pressed turns green, and it is
fixed as a copy channel(s).
z All channels are selected if the [MULTI] button is pressed.
Pressing the button once again will deselect all channels
except the fixed one(s).
12
Turn the shuttle dial clockwise.
The copy data and the capacity of the copy destination are
checked.
The available space and write capacity are checked.
The available space and write capacity are displayed and the
cursor moves to “COPY START”.
13
Turn the shuttle dial clockwise.
Copying begins. The message “COPY TO USB MEMORY !”
is displayed on-screen during the copy procedure.
When copying is completed, “COPY FINISHED !” is
displayed.
„ To cancel copying
Press the [MARK/COPY] button.
z When a USB memory becomes full during a copy
operation, a message will appear before the operation
stops. By making any control action, the display returns to
the normal screen. Replace the USB memory with a new
one and repeat a copy operation. Even if the previous
operation was aborted due to the lack of storage space,
the data that had been copied before the operation
stopped is saved in the copy destination.
COPY TO : USB MEMORY
UNIT : PICTURES
AUDIO : OFF
HOW MANY : 1
COPY CH 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
SELECT COPY CHANNEL
COPY TO : USB MEMORY
UNIT : PICTURES
AUDIO : OFF
HOW MANY : 20
COPY CH 01
01 02 03 04 05 06 05 06 07 08
09 10 11 12 13 14 15 15 16
SELECT COPY CHANNEL
COPY START ->
FORMAT/ERASE: USB MEMORY
FORMAT/ERASE START ->
[CAMERA SELECT] button
[MULTI] button
CHECKING DATA SIZE ! < 56% >
COPY TO : USB MEMORY
TYPE : -----
FREE AREA : 200MB
DATA SIZE : 130MB
COPY START ->
COPY TO USB MEMORY ! < 56% >
COPY FINISHED ! < 100% >
COPY CANCELED ! < 0% >