General set, Display set, Buzzer set – Sanyo DSR-5716P User Manual
Page 196: Click the button on the operation panel, Click “3. general set, Click “1. display set, Select “on” or “off” for each display item, Click [save, Click “2. buzzer set
English
195
4
GENERAL SET
Set conditions for the display of data on the unit’s monitor by
selecting “ON” or “OFF” for each item.
1
Click the
button on the operation
panel.
The “MAIN MENU” is displayed.
2
Click “3. GENERAL SET”.
The “GENERAL SET” screen is displayed.
3
Click “1. DISPLAY SET”.
The “DISPLAY SET” screen is displayed.
4
Select “ON” or “OFF” for each display
item.
5
Click [SAVE].
The setting is saved.
z
These settings apply to information displayed on the
monitor connected to the unit, not to information displayed
on the PC monitor.
Use the following procedure to set a warning buzzer that
sounds when an alarm occurs or when the hard disk space
reaches remaining-space warning level.
1
Click the
button on the operation
panel.
The “MAIN MENU” is displayed.
2
Click “3. GENERAL SET”.
The “GENERAL SET” screen is displayed.
3
Click “2. BUZZER SET”.
The “BUZZER SET” screen is displayed.
4
Select “ON” or “OFF” for each display item.
1. DISPLAY SET
Item
Default
setting
Description
(1) DATE
ON
Displays the current date or
recording date.
(2) TIME
ON
Displays the current time or
recording time.
(3) QUALITY
ON
Displays the picture quality for
recording or playback.
(4) AUDIO
ON
Displays the audio status during
recording or playback.
(5)
ALARM
COUNT
ON
Displays the number of recorded
alarms.
(6)
ALARM
TYPE
ON
Displays the alarm recording type.
z
For alarm recording:
“ALARM” is displayed.
z
For pre-alarm recording:
“PRE” is displayed.
(7) TITLE
ON
Displays the camera title.
GENERAL SET
1. DISPLAY SET
2. BUZZER SET
3. SECURITY LOCK SET
4. USER ID SET
5. RS-485 SET
6. HDD SET
7. NETWORK SET
8. NETWORK CONTROL SET
DISPLAY SET
DATE
:
ON
TIME
:
ON
QUALITY
:
ON
AUDIO
:
ON
ALARM COUNT
:
ON
ALARM TYPE
:
ON
TITLE
:
ON
SAVE
(1)
5
(3)
(7)
(5)
(2)
(4)
(6)
2. BUZZER SET
Item
Default
setting
Description
(1) ALARM
OFF
Sounds a buzzer when an alarm
is detected.
(2) DISK FULL
ON
Sounds a buzzer when the
amount of data stored in each of
the hard disk recording areas
reaches the remaining-space
warning level (JP.188).
(3)
DISK
ERROR
ON
Sounds a buzzer when a hard-
disk error occurs.
(4)
LOCK
WARNING
ON
Sounds a buzzer when a
restricted operation button is
pressed during security lock.
Specifically, the buzzer sounds
twice with an interval of
approximately 0.5 seconds.
(5) KEY IN
OFF
Buzzer emits a key-operation
sound each time a button is
pressed.
(6) NON REC
OFF
Sounds a buzzer when recording
is stopped.
(7)
DISK
TEMPERATURE
ON
Sounds a buzzer accompanied with
a warning message, when the
temperature has exceeded a given
value in the hard disk drive.
BUZZER SET
ALARM
:
OFF
DISK FULL
:
ON
DISK TEMPERATURE :
ON
DISK ERROR
:
ON
LOCK WARNING
:
ON
KEY IN
:
OFF
NON REC
:
OFF
SAVE
(1)
(2)
5
(3)
(4)
(5)
(6)
(7)