Sanyo DSR-5716P - Manual (Page 12)

NAMES AND FUNCTIONS OF PARTS 2
English
11
Rear panel
1. Optional board slot
You can use the slot to add on a RAID unit using a SCSI
(VZU-SCB1) interface or to connect an expansion unit via an
S-ATA (VZU-SATB1) board. You cannot use a RAID unit and
an expansion on unit at the same time.
Please contact the dealer for details.
When handling and connecting, be sure to read the instruction
manual included with the option board.
2. VIDEO IN terminals
Connects to video cameras.
The DSR-5709P has nine terminals.
3. VIDEO OUT terminals
Connects to a monitor to view camera images.
The DSR-5709P has nine terminals.
4. ALARM IN terminals (1 to 16)
Connects to an externally installed alarm switch. Operate the
alarm switch for alarm recording.
The DSR-5709P has nine terminals.
5. SENSOR ALARM OUT terminals
The terminals are used when motion sensors have been set
(JP.105) to output an alarm signal to a connected device
upon detection of motion.
The DSR-5709P has nine terminals.
DSR-5716P
The number of terminals for the DSR-5709P may differ. For more details, see below.
IN
OUT
ALL
RESET
USB LAN IN OUT VGA OUT
MONITOR OUT DO NOT CONNECT TO PHONE LINE
A B
MAIN MON2
AUDIO
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
ALARM IN
SENSOR
ALARM OUT
SELECTABLE
OUTPUT 1 :
NON REC OUT/VIDEO LOSS
OUTPUT 2 :
ARACHIVE FULL/TIMER REC OUT
AC IN
CONTROL
2ND RS-485/422
EXCEPT SANYO SSP
REMOTE CLOCK INCLOCK OUT
ALARM RESET WARNING OUT
FULL
ALARM OUTPUT 1OUTPUT 2 EXT TIMER IN
OUT A B C
C 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
R1 R2 C
RS-485
SANYO SSP
RS-485
TERMINATE
OFF ON
4 5 17
6 14 7
2
3
16
1
8 9
18
10 11 13 15 12
Pin Signal
C Ground
ALARM IN 1 Alarm input No. 1
ALARM IN 2 Alarm input No. 2
ALARM IN 3 Alarm input No. 3
ALARM IN 4 Alarm input No. 4
ALARM IN 5 Alarm input No. 5
ALARM IN 6 Alarm input No. 6
ALARM IN 7 Alarm input No. 7
ALARM IN 8 Alarm input No. 8
ALARM IN 9 Alarm input No. 9
ALARM IN 10 Alarm input No. 10
ALARM IN 11 Alarm input No. 11
ALARM IN 12 Alarm input No. 12
ALARM IN 13 Alarm input No. 13
ALARM IN 14 Alarm input No. 14
ALARM IN 15 Alarm input No. 15
ALARM IN 16 Alarm input No. 16
Pin Signal
C Ground
SENSOR ALARM OUT 1
Output of an alarm signal for
Camera No. 1
SENSOR ALARM OUT 2
Output of an alarm signal for
Camera No. 2
SENSOR ALARM OUT 3
Output of an alarm signal for
Camera No. 3
SENSOR ALARM OUT 4
Output of an alarm signal for
Camera No. 4
SENSOR ALARM OUT 5
Output of an alarm signal for
Camera No. 5
SENSOR ALARM OUT 6
Output of an alarm signal for
Camera No. 6
SENSOR ALARM OUT 7
Output of an alarm signal for
Camera No. 7
SENSOR ALARM OUT 8
Output of an alarm signal for
Camera No. 8
SENSOR ALARM OUT 9
Output of an alarm signal for
Camera No. 9
SENSOR ALARM OUT 10
Output of an alarm signal for
Camera No. 10
SENSOR ALARM OUT 11
Output of an alarm signal for
Camera No. 11
SENSOR ALARM OUT 12
Output of an alarm signal for
Camera No. 12
SENSOR ALARM OUT 13
Output of an alarm signal for
Camera No. 13
SENSOR ALARM OUT 14
Output of an alarm signal for
Camera No. 14
SENSOR ALARM OUT 15
Output of an alarm signal for
Camera No. 15
SENSOR ALARM OUT 16
Output of an alarm signal for
Camera No. 16