Sanyo DSR-5716P - Manual (Page 154)

ADVANCED MENU SET 8
English
153
To register preset positions that are applied during camera
control, follow these steps:
1
Press the [FUNC.] button (1).
The FUNC. indicator lights up in blue to indicate that you are
now in camera control mode.
2
Set the camera lens orientation.
Adjust the lens to your desired orientation using the pan/tilt
functions.
3
Press and hold the [PRESET] button
(2) for about 3 seconds.
The buzzer beeps twice and the button indicator flickers (at
4Hz) to indicate that you are now in preset registration mode.
4
Press one of the [CAMERA SELECT]
buttons (3) to specify the channel
number for the camera.
The button stops flickering, and the camera lens orientation at
the time of button press is registered as the preset position.
Repeat steps 2 and 3 above to register the preset positions for
other cameras.
z Each preset number is associated with a specific channel
number.
For example, CH02 corresponds to PRESET 2.
1
Press the [FUNC.] button.
The FUNC. indicator lights up and camera operation mode is
activated.
2
Click the buttons to operate the camera.
How to Register Preset Positions
3
2 1
Operating the camera with the digital video
recorder
Button
Button name in
normal mode
Operation
[MENU]
button
[MENU] button
Displays the camera menu
screen.
[ENTER]
button
[EXIT/OSD] button
Determines items on the
camera menu screen.
[PRESET]
button
[QUAD] button
Press the [PRESET] button
and then the [CAMERA
SELECT] button to move to
a preset position.
[AUTO PAN]
button
[MULTI] button
Enables auto panning
(refer to note)
[SEQUENCE]
button
[MON2] button
Enables automatic camera
selection (refer to note)
[TOUR]
button
[PLUS] button
Enables TOUR (refer to
note)
[ZOOMK]
button
[ alarm] button Zooms out
[ZOOML]
button
[alarm ] button Zooms in
[AF] button
[PLAY/STOP]
button
Enables auto focus
[FOCUS]
button [SHUTTLE HOLD]
button
Press the [FOCUS] button
and use [ZOOM
↑] or
[ZOOM ↓] button to manually
adjust the focus.
[IRIS] button [STILL] button
Press the [IRIS] button and
use [ZOOM
↑] or [ZOOM ↓]
button to adjust the iris
(aperture).
PAN Shuttle dial Controls manual panning
TILT Jog dial Controls manual tilting
FUNC.